.

	FLUOROPROBE® SPECIFICATIONS MODEL FL-3 Application Temperature Range: Instrument: -30º C to +50º C Sensor Material: -85º F to +400º F Operation Range: Aqueous Solutions: 0 ppm to Supersaturation Sensor Thickness: .005" *Response Time: Aqueous Solutions: 30 sec (90%) *NOTE: Response Time based upon approximately 1 ft/minute flow across sensor- Response Time will decrease with increased flow, however, FLOW IS NOT REQUIRED FOR MEASUREMENTS! Gaseous Phases: 7 sec(90%) Accuracy: Aqueous Solutions: Range 0 ppm - 10 ppm Measurement accuracy: +/- 1% Repeatability: +/- .5% if span Stability: .05 ppm Instrument Measurement: Steady state (Amplitude/Lifetime) Temperature Compensation: Yes(thermistor) Ambient Excitation Compensation: Yes Sensor Lifetime: (Glass bonded/Non-bonded) Based solely upon the application environment of Silicone Rubber Estimated lifetime: 7-10 years 4-20 mA: Max resistance 550 ohms ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Physical Specifications MODEL FL-3 LENGTH..................................... 9" NOMINAL DIAMETER................................. 1.25" NOMINAL MATERIAL.................................. PVC ENCAPSULANT......................... EPOXY SENSOR TYPE.......................... FLUORESCENT EXCITATION WAVELENGTH... 400nm EMISSION WAVELENGTH....... 610nm SENSOR MATERIAL................. SILICONE VOLTAGE SUPPLY....... +12VDC -12VDC GND +5VDC -5VDC 80kHz 50% DUTY OUTPUT SIGNAL.................... AC MODULATED SENSOR THICKNESS............ .005" PROBE CABLE........................ POLYURETHANE MEASUREMENT...................... LIFETIME/INTENSITY FLUOROPROBE® IS A REGISTERED TRADEMARK OF ENVIRONMENTAL INSTRUMENTS INC. Back to the top of page
	Environmental Instruments, LLC 144 Industrial Park Drive Suite A-3 Waynesville NC 28786 Phone:(828)452-7776 Fax:(828)452-7076 email: envinst@thefluoroprobe.com